
Tóm tắt tài liệu kỹ thuật
Purolite C100S
PDF datasheet mirror for Purolite C100S (Purolite). Verify with OEM before design.
Summary
Product identification
- Product Name: Purolite C100S
- Description: Polystyrenic Gel, Strong Acid Cation Resin, Sodium form, Sugar Grade
- Product Line: Purolite
Typical Physical & Chemical Characteristics
- Polymer Structure: Gel polystyrene crosslinked with divinylbenzene
- Appearance: Spherical Beads
- Functional Group: Sulfonic Acid
- Ionic Form: Na⁺ form
- Total Capacity: 2.05 eq/L (44.8 Kgr/ft³) (Na⁺ form)
- Moisture Retention: 43 - 47 % (Na⁺ form)
- Particle Size Range: 425 - 1200 µm
- < 425 µm (max.): 2 %
- Uniformity Coefficient (max.): 1.6
- Reversible Swelling, Na⁺ → H⁺ (max.): 8 %
- Specific Gravity: 1.29
- Shipping Weight (approx.): 815 - 850 g/L (50.9 - 53.1 lb/ft³)
- Temperature Limit: 120 °C (248.0 °F)
Principal Applications
- Demineralization - Sugar solutions
- Food and beverage processing
- Demineralization - Gelatin
Advantages
- Lower pressure drop versus standard resin
- Low extractables
- Excellent physical and chemical stability
- High operating capacity
- Good kinetic performance
Hydraulic Characteristics
Backwash
- Bed Expansion: Resin bed should be expanded between 50 and 70% during up-flow backwash for at least 10 to 15 minutes.
- Initial Service Expansion: Approximately 30 minutes of expansion is usually sufficient to properly classify the bed when first putting into service.
- Factors Affecting Expansion: Bed expansion increases with flow rate and decreases with influent fluid temperature.
- Caution: Avoid loss of resin through the top of the vessel by over expansion.
Pressure Drop
- Factors Affecting Pressure Drop: Particle size distribution, bed depth, voids volume, flow rate, and viscosity of the influent solution. Also affected by particulate matter, abnormal resin compressibility, or incomplete bed classification.
- Service Flow Rates: May vary from 10 to 40 BV/h depending on influent water quality, application, and plant design.
Regulatory Approvals
- Kosher Certified
Typical Packaging
- 1 ft³ Sack
- 25 L Sack
- 5 ft³ Drum (Fiber)
- 1 m³ Supersack
- 42 ft³ Supersack
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.