
Tóm tắt tài liệu kỹ thuật
Purolite C100MBH
PDF datasheet mirror for Purolite C100MBH (Purolite). Verify with OEM before design.
Summary
Product identification
- Product Name: Purolite C100MBH
- Type: Polystyrenic Gel, Strong Acid Cation Resin, Hydrogen form, Mixed Bed Grade
- Product Line: Purolite
Typical Physical & Chemical Characteristics
- Polymer Structure: Gel polystyrene crosslinked with divinylbenzene
- Appearance: Spherical Beads
- Functional Group: Sulfonic Acid
- Ionic Form: H⁺ form
- Total Capacity: 2 eq/L (43.7 Kgr/ft³) (Na⁺ form)
- Moisture Retention: 51 - 55 % (H⁺ form)
- Particle Size Range: 425 - 1200 µm
- < 425 µm (max.): 2 %
- Uniformity Coefficient (max.): 1.6
- Reversible Swelling, Na⁺ → H⁺ (max.): 8 %
- Specific Gravity: 1.2
- Shipping Weight (approx.): 755 - 790 g/L (47.2 - 49.4 lb/ft³)
- Temperature Limit: 120 °C (248.0 °F)
Systems
- Coflow regenerated systems
- Mixed bed demineralizer
Principal Applications
- Mixed Bed cation component
- Demineralization - Industrial
Advantages
- Efficient separation
- Excellent physical and chemical stability
- Good kinetic performance
- High operating capacity
Hydraulic Characteristics
Backwash
During up-flow backwash, the resin bed should be expanded in volume between 50 and 70% for at least 10 to 15 minutes. This operation will free particulate matter, clear the bed of bubbles and voids, and reclassify the resin particles ensuring minimum resistance to flow. When first putting into service, approximately 30 minutes of expansion is usually sufficient to properly classify the bed. Bed expansion increases with flow rate and decreases with influent fluid temperature. Caution must be taken to avoid loss of resin through the top of the vessel by over expansion of the bed.
Pressure Drop
The pressure drop across a bed of ion exchange resin depends on the particle size distribution, bed depth, and voids volume of the exchange material, as well as on the flow rate and viscosity of the influent solution. Factors affecting these parameters, such as the presence of particulate matter filtered out by the bed, abnormal compressibility of the resin, or incomplete classification of the bed, will result in an increased head loss. Depending on the quality of the influent water, the application, and the design of the plant, service flow rates may vary from 10 to 40 BV/h.
Typical Packaging
- 1 ft³ Sack
- 25 L Sack
- 5 ft³ Drum (Fiber)
- 1 m³ Supersack
- 42 ft³ Supersack
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.