
Tóm tắt tài liệu kỹ thuật
Purolite A300
PDF datasheet mirror for Purolite A300 (Purolite). Verify with OEM before design.
Summary
Product identification
Purolite A300 is a polystyrenic gel, Type II strong base anion resin in chloride form. It is FDA 21 CFR 173.25 compliant.
Typical Physical & Chemical Characteristics
- Polymer Structure: Gel polystyrene crosslinked with divinylbenzene
- Appearance: Spherical Beads
- Functional Group: Type II Quaternary Ammonium
- Ionic Form: Cl⁻
- Total Capacity: 1.4 eq/L (30.6 Kgr/ft³) (Cl⁻ form)
- Moisture Retention: 40 - 45 % (Cl⁻ form)
- Particle Size Range: 300 - 1200 µm
- Fines: < 300 µm (max.) 1 %
- Uniformity Coefficient (max.): 1.7
- Reversible Swelling, Cl⁻ → OH⁻ (max.): 15 %
- Specific Gravity: 1.09
- Shipping Weight (approx.): 685 - 720 g/L (42.8 - 45.0 lb/ft³)
- Temperature Limit (Cl⁻ form): 85 °C (185.0 °F)
- Temperature Limit (OH⁻ form): 35 °C (95.0 °F)
Regulatory Approvals
- Compliant with FDA Regulation 21 CFR 173.25 for Food Treatment, Ion Exchangers
- IFANCA Halal Certified
- LPPOM MUI Halal Certified
- Kosher Certified
- Certified by the WQA to NSF/ANSI-61 Standard
Typical Packaging
- 1 ft³ Sack
- 25 L Sack
- 5 ft³ Drum (Fiber)
- 1 m³ Supersack
- 42 ft³ Supersack
Principal Applications
- Demineralization - Industrial
Advantages
- High operating capacity
- High regeneration efficiency
- Excellent physical stability
Hydraulic Characteristics
Backwash
During up-flow backwash, the resin bed should be expanded between 50% and 70% for at least 10 to 15 minutes. Bed expansion increases with flow rate and decreases with influent fluid temperature. Caution should be taken to avoid resin loss by over-expansion.
Pressure Drop
The pressure drop across the resin bed depends on particle size distribution, bed depth, voids volume, flow rate, and influent solution viscosity. Factors such as particulate matter, abnormal resin compressibility, or incomplete bed classification can increase head loss. Service flow rates may vary from 10 to 40 BV/h depending on water quality, application, and plant design.
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.