Quay lại Purolite
Purolite logo

Tóm tắt tài liệu kỹ thuật

Purolite A200MB

PDF datasheet mirror for Purolite A200MB (Purolite). Verify with OEM before design.

Summary

Product identification

Purolite A200MB is a polystyrenic gel, Type II strong base anion resin. It is supplied in chloride form and is a mixed bed grade.

Typical Physical & Chemical Characteristics

  • Polymer Structure: Gel polystyrene crosslinked with divinylbenzene
  • Appearance: Spherical Beads
  • Functional Group: Type II Quaternary Ammonium
  • Ionic Form: Cl⁻
  • Total Capacity: 1.3 eq/L (28.4 Kgr/ft³) (Cl⁻ form)
  • Moisture Retention: 45 - 51 % (Cl⁻ form)
  • Particle Size Range: 300 - 1200 µm
  • Fines (< 300 µm): 1 % (max.)
  • Uniformity Coefficient: 1.7 (max.)
  • Reversible Swelling (Cl⁻ → OH⁻): 15 % (max.)
  • Specific Gravity: 1.08
  • Shipping Weight (approx.): 680 - 710 g/L (42.5 - 44.4 lb/ft³)
  • Temperature Limit (Cl⁻ form): 85 °C (185.0 °F)
  • Temperature Limit (OH⁻ form): 35 °C (95.0 °F)

Principal Applications

  • Demineralization - Industrial

Advantages

  • High operating capacity
  • Efficient regeneration
  • Exceptional physical stability
  • Good kinetic performance

Hydraulic Characteristics

Backwash

  • The resin bed should be expanded between 50% and 70% for at least 10 to 15 minutes during up-flow backwash.
  • Expansion frees particulate matter, removes bubbles and voids, and reclassifies resin particles.
  • Initial classification may require approximately 30 minutes of expansion.
  • Bed expansion increases with flow rate and decreases with influent fluid temperature.
  • Caution is required to prevent resin loss through the top of the vessel due to over-expansion.

Pressure Drop

  • Pressure drop depends on particle size distribution, bed depth, void volume, flow rate, and influent solution viscosity.
  • Factors like filtered particulate matter, abnormal resin compressibility, or incomplete bed classification can increase head loss.
  • Service flow rates can range from 10 to 40 BV/h, depending on influent water quality, application, and plant design.

Regulatory Approvals

  • IFANCA Halal Certified
  • LPPOM MUI Halal Certified

Typical Packaging

  • 1 ft³ Sack
  • 25 L Sack
  • 5 ft³ Drum (Fiber)
  • 1 m³ Supersack
  • 42 ft³ Supersack
  • Bulk Tanker (NA only)

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.