Tóm tắt tài liệu kỹ thuật
DIAION WK40
PDF datasheet mirror for DIAION WK40 (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ WK40L
- Type: Weak Acid Cation
- Matrix: Acrylic, Porous
- Functional Group: Carboxylic Acid
- Ionic Form: H⁺
DIAION™ WK40L is an acrylic-type weakly acidic cation exchange resin recommended for dealkalization, demineralization, and wastewater treatment.
Typical Properties
- Shipping Density: 770 g/L
- Mean Particle Size: 640 µm
- Particle Density: 1.19 g/mL
- Total Swelling (H⁺ to Na⁺): 73 %
- Water Content: 41 - 48 %
- Whole Bead Count: 95 % min.
- Total Capacity: 4.4 meq/mL min.
- Particle Size Distribution on 1180 μm: 10 % max.
- Particle Size Distribution thr. 425 μm: 3 % max.
- Effective Size: 0.45 mm min.
- Uniformity Coefficient: 1.6 max.
Recommended Operating Conditions
- Maximum Operating Temperature: 120 °C
- Operating pH Range: 4 - 14
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 5 - 40 m/h
Regeneration
- Regenerant: HCl
- Regenerant Concentration: 1 - 5 % HCl
- Regenerant Level: 110 % of ionic load
- Regenerant Flow Rate: 2 - 6 m/h
- Total Rinse Requirement: 10 - 20 BV
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth in normal downflow operation is shown in the graphs in the original document.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.