Tóm tắt tài liệu kỹ thuật
DIAION UBKNTU
PDF datasheet mirror for DIAION UBKNTU (Mitsubishi). Verify with OEM before design.
Summary
Product Identification
- Grade Name: DIAION™ UBKN1U
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Gel
- Functional Group: Sulfonic acid
- Ionic Form: H⁺
Operating Limits
- Maximum Operating Temperature: 120 ℃
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 40 m/h
Feed Water / Regeneration
- Regenerant: HCl, H₂SO₄
- Regenerant Concentration:
- HCl: 4 - 10 %
- H₂SO₄: 1 - 4 %
- Regenerant Level: 30 - 150 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Product Water
- Outlet resistivity: 12 MΩ‧cm (max.)
- ΔTOC: 50 ppb (min.)
Typical Properties
- Cross-linkage: 14%
- Shipping Density: 810 g/L
- Particle Density: 1.27 g/mL
- Total Swelling (Na⁺ to H⁺): 5 %
- Whole Bead Count: 95 % (min.)
- Salt Splitting Capacity: 2.4 meq/mL (min.)
- Water Content: 33 - 43 %
- Average Diameter: 650 ± 50 μm
- Particle Size Distribution on 1180 μm: 5 % (max.)
- Particle Size Distribution through 500 μm: 2 % (max.)
- Uniformity Coefficient: 1.2 (max.)
- Ionic Conversion (H⁺): 99 % (min.)
- Ionic Conversion (Na⁺): 1.0 % (max.)
Mechanical / Hydraulic
- Hydraulic Characteristics: Pressure drop shown in graphs in the official PDF.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.