Tóm tắt tài liệu kỹ thuật
DIAION UBK10HUP
PDF datasheet mirror for DIAION UBK10HUP (Mitsubishi). Verify with OEM before design.
Summary
Product Identification
- Grade Name: DIAION™ UBK10HUP
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Gel
- Functional Group: Sulfonic acid
- Ionic Form: H⁺
Operating Limits
- Maximum Operating Temperature: 120 ℃
- Operating pH Range: 0 - 14
Feed Water / Regeneration
- Regenerant: HCl, H₂SO₄
- Regenerant Concentration:
- HCl: 4 - 10 %
- H₂SO₄: 1 - 4 %
- Regenerant Level: 30 - 150 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Product Water
- Outlet Resistivity: 12 MΩ‧cm (maximum)
- ΔTOC: 20 ppb (minimum)
Mechanical / Hydraulic
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 40 m/h
- Shipping Density: 800 g/L
- Particle Density: 1.22 g/mL
- Total Swelling (Na⁺ to H⁺): 8 %
- Whole Bead Count: 90 % (minimum)
- Average Diameter: 660 ± 50 μm
- Uniformity Coefficient: 1.10 (maximum)
Typical Properties
- Salt Splitting Capacity: 1.9 meq/mL (minimum)
- Water Content: 45 - 51 %
- Ionic Conversion (H⁺): 95 % (minimum)
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth is shown in graphs in the original document.
Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.