Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION UBK10H

PDF datasheet mirror for DIAION UBK10H (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ UBK10H
  • Type: Strong Acid Cation
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Sulfonic acid
  • Ionic Form: H⁺

Operating limits

  • Maximum Operating Temperature: 120 ℃
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm

Service / Regeneration

  • Service Flow Rate: 10 - 40 m/h
  • Regenerant: HCl, H₂SO₄
    • Regenerant Concentration: HCl 4 - 10 %, H₂SO₄ 1 - 4 %
    • Regenerant Level: 30 - 150 g/L
    • Regenerant Flow Rate: 2 - 10 m/h
  • Total Rinse Requirement: 2 - 10 BV

Specification

  • Whole Bead Count: 90 min. %
  • Salt Splitting Capacity: 1.9 min. meq/mL
  • Water Content: 45 - 51 %
  • Average Diameter: 660 ± 50 μm
  • Uniformity Coefficient: 1.10 max.
  • Ionic Conversion (H⁺): 99 min. %

Typical Properties

  • Shipping Density: 800 g/mL
  • Particle Density: 1.22 g/mL
  • Total Swelling (Na⁺ to H⁺): 8 %

DIAION™ UBK10H is a cation exchange resin with a uniform particle size, 10% cross-linkages, and excellent properties. It is recommended for a wide range of applications, especially in the manufacturing and processing of pure water.

Hydraulic Characteristics

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth in normal downflow operation is shown in graphs (not included in this text extract).

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.