Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION UBK10

PDF datasheet mirror for DIAION UBK10 (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ UBK10
  • Type: Strong Acid Cation
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Sulfonic acid
  • Ionic Form: Na⁺

Operating limits

  • Maximum Operating Temperature: 120 °C
  • Operating pH Range: 0 - 14

Feed water

  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 40 m/h

Regeneration

  • Regenerant: HCl, H₂SO₄
  • Regenerant Concentration: HCl 4 - 10 %, H₂SO₄ 1 - 4 %
  • Regenerant Level: 30 - 150 g/L
  • Regenerant Flow Rate: 2 - 10 m/h
  • Total Rinse Requirement: 2 - 10 BV

Specification

  • Whole Bead Count: 90 % min.
  • Salt Splitting Capacity: 2.2 meq/mL min.
  • Water Content: 38 - 44 %
  • Average Diameter: 650 ± 50 μm
  • Uniformity Coefficient: 1.10 max.

Typical Properties

  • Shipping Density: 850 g/L
  • Particle Density: 1.32 g/mL
  • Total Swelling (Na⁺ to H⁺): 8 %

Hydraulic Characteristics

Pressure drop information is available in graphical form in the original document for various temperatures and flow rates per meter of bed depth.

Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.