Tóm tắt tài liệu kỹ thuật
DIAION UBK04H
PDF datasheet mirror for DIAION UBK04H (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ UBK04H
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Gel
- Functional Group: Sulfonic acid
- Ionic Form: H⁺
Operating limits
- Maximum Operating Temperature: 120 ℃
- Operating pH Range: 0 - 14
Feed water / Operating conditions
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 40 m/h
- Regenerant: HCl, H₂SO₄
- Regenerant Concentration:
- HCl: 4 - 10 %
- H₂SO₄: 1 - 4 %
- Regenerant Level: 30 - 150 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Product water / Properties
- Whole Bead Count: 95 min.
- Salt Splitting Capacity: 1.2 meq/mL min.
- Water Content: 65 - 70 %
- Average Diameter: 500 ± 50 μm
- Uniformity Coefficient: 1.2 max.
- Ionic Conversion (H⁺): 95 min.
Mechanical / Hydraulic
- Shipping Density: 840 g/mL
- Particle Density: 1.13 g/mL
- Total Swelling (Na⁺ to H⁺): 9 %
Typical Properties
DIAION™ UBK04H is a cation exchange resin with a uniform particle size. It has 4% cross-linkages and excellent properties. A wide range of applications, especially in a field of catalysts, is recommended.
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ UBK04H resin in normal down flow operation is shown in the graphs below. See the official PDF for exact tabulated values.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.