Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION UBAN1

PDF datasheet mirror for DIAION UBAN1 (Mitsubishi). Verify with OEM before design.

Summary

Product Identification

  • Grade Name: DIAION™ UBAN1
  • Type: Strong Base Anion
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Type I (trimethyl ammonium groups)
  • Ionic Form: OH⁻

Operating Limits

  • Maximum Operating Temperature:
    • 80 °C (Cl⁻ form)
    • 60 °C (OH⁻ form)
  • Operating pH Range: 0 - 14

Feed Water

  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 60 m/h

Regeneration

  • Regenerant: NaOH
  • Regenerant Concentration: 2 - 8 % NaOH
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 8 m/h
  • Total Rinse Requirement: 2 - 10 BV

Mechanical / Hydraulic

  • Average Diameter: 630 ± 50 μm
  • Particle Size Distribution on 1180 μm: 0.5 % max.
  • Particle Size Distribution 425 - 1180 μm: 98 % min.
  • Particle Size Distribution through 425 μm: 1.0 % max.
  • Uniformity Coefficient: 1.2 max.
  • Shipping Density: 720 g/L
  • Particle Density: 1.08 g/mL
  • Total Swelling (Cl⁻ to OH⁻): 22 %

Specifications

  • Whole Bead Count: 90 % min.
  • Salt Splitting Capacity: 1.2 meq/mL min.
  • Ionic Conversion (OH⁻): 95 % min.
  • Ionic Conversion (CO₃²⁻): 5 % max.
  • Ionic Conversion (Cl⁻): 0.2 % max.
  • Metal Content (Ca): 50 mg/L max.
  • Metal Content (Pb): 10 mg/L max.
  • Metal Content (Fe): 50 mg/L max.
  • Metal Content (Cu): 10 mg/L max.
  • Water Extractables: 0.1 g/L-R max.
  • Batch Extractable TOC: 10 mg/L max.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.