Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION UBA200

PDF datasheet mirror for DIAION UBA200 (Mitsubishi). Verify with OEM before design.

Summary

Product Identification

  • Grade Name: DIAION™ UBA200
  • Type: Strong Base Anion
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Type II (dimethylethanol ammonium groups)
  • Ionic Form: Cl⁻

Operating Limits

  • Maximum Operating Temperature: 60 °C (for Cl⁻), 40 °C (for OH⁻)
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm

Feed Water / Regenerant

  • Regenerant: NaOH
  • Regenerant Concentration: 2 - 8 % NaOH
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 8 m/h
  • Total Rinse Requirement: 2 - 10 BV

Operating Conditions

  • Service Flow Rate: 10 - 60 m/h

Typical Properties

  • Whole Bead Count: 90 min.
  • Salt Splitting Capacity: 1.3 meq/mL min.
  • Water Content: 45 - 51 %
  • Average Diameter: 575 ± 50 μm
  • Uniformity Coefficient: 1.10 max.
  • Shipping Density: 700 g/L
  • Particle Density: 1.11 g/mL
  • Total Swelling (Cl⁻ to OH⁻): 14 %

Hydraulic Characteristics

Graphs showing approximate pressure drop for various temperatures and flow rates per meter of bed depth are provided in the original document.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.