Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION UBA120OHUP

PDF datasheet mirror for DIAION UBA120OHUP (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ UBA120OHUP
  • Type: Strong Base Anion
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Type I (trimethyl ammonium groups)
  • Ionic Form: OH⁻

Product Description

DIAION™ UBA120OHUP is an anion exchange resin with a uniform particle size, standard cross-linkages, and excellent properties, recommended for higher purity water treatment applications.

Operating limits

  • Maximum Operating Temperature:
    • 80 °C (Cl⁻ form)
    • 60 °C (OH⁻ form)
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm

Feed water

  • Regenerant: NaOH
  • Regenerant Concentration: 2 - 8 % NaOH
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 8 m/h

Product water

  • Outlet resistivity: 15 MΩ·cm min.
  • ΔTOC: 20 ppb max.

Mechanical / hydraulic

  • Service Flow Rate: 10 - 60 m/h
  • Total Rinse Requirement: 2 - 10 BV
  • Shipping Density: 680 g/mL
  • Particle Density: 1.08 g/mL
  • Total Swelling (Cl⁻ to OH⁻): 24 %
  • Whole Bead Count: 90 % min.
  • Salt Splitting Capacity: 1.0 meq/mL min.
  • Water Content: 62 - 70 %
  • Average Diameter: 620 ± 50 μm
  • Uniformity Coefficient: 1.10 max.
  • Ionic Conversion (OH⁻): 90 % min.

Hydraulic Characteristics: Graphs showing approximate pressure drop at various temperatures and flow rates per meter of bed depth are available in the original document.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.