Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION UBA10A

PDF datasheet mirror for DIAION UBA10A (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ UBA10A
  • Type: Strong Base Anion
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Type I (trimethyl ammonium groups)
  • Ionic Form: Cl⁻

DIAION™ UBA10A is an anion exchange resin with a uniform particle size, standard cross-linkages, and excellent properties. It is recommended for a wide range of applications, especially in condensate mineralization for power plants.

Operating limits

  • Maximum Operating Temperature: 80 °C (Cl⁻), 60 °C (OH⁻)
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 60 m/h

Regenerant

  • Regenerant: NaOH
  • Regenerant Concentration: 2 - 8 % NaOH
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 8 m/h
  • Total Rinse Requirement: 2 - 10 BV

Mechanical / hydraulic

  • Apparent Density: 0.67 - 0.75 g/mL
  • Water Content: 43 - 50 %
  • Particle Size Distribution (0.400 - 0.800 mm): 95 % min.
  • Particle Size Distribution on 0.800 mm: 1 % max.
  • Effective Size: 0.50 - 0.71 mm
  • Uniformity Coefficient: 1.1 max.
  • Particle Density: 1.06 - 1.10 g/mL
  • Sphericity after osmotic-attrition: 90 % min.
  • Average Diameter: 550 μm
  • Total Swelling (Cl⁻ to OH⁻): 23 %

The pressure drop at various temperatures and flow rates for each meter of bed depth is shown in hydraulic characteristic graphs in the official PDF.

Specification

  • Whole Bead Count: 95 % min.
  • Salt Splitting Capacity: 1.35 mmol/mL min.

Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.