Tóm tắt tài liệu kỹ thuật
DIAION UBA100OHUP
PDF datasheet mirror for DIAION UBA100OHUP (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ UBA100OHUP
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Gel
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: OH⁻
Specification
- Whole Bead Count: 90 min. %
- Salt Splitting Capacity: 1.0 min. meq/mL
- Water Content: 59 - 65 %
- Average Diameter: 590 ± 50 μm
- Uniformity Coefficient: 1.10 max.
- Ionic Conversion (OH⁻): 95 min. %
- Outlet resistivity: 15 max. MΩ‧cm
- ΔTOC: 20 min. ppb
Product Data Sheet
- Shipping Density: 660 g/mL
- Particle Density: 1.07 g/mL
- Total Swelling (Cl⁻ to OH⁻): 23 %
Typical Properties
- Maximum Operating Temperature: 80 ℃ (Cl⁻); 60 ℃ (OH⁻)
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
Recommended Operating Conditions
- Regenerant: NaOH
- Regenerant Concentration: NaOH 2 - 8 %
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Product
DIAION™ UBA100OHUP is an anion exchange resin with a uniform particle size. It has standard cross-linkages and excellent properties. It is recommended for higher purity water treatment applications.
Hydraulic Characteristics
Graphs showing approximate pressure drop at various temperatures and flow rates per meter of bed depth are available in the original document for DIAION™ UBA100OHUP resin in normal downflow operation.
Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.