Tóm tắt tài liệu kỹ thuật
DIAION UBA100OH
PDF datasheet mirror for DIAION UBA100OH (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ UBA100OH
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Gel
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: OH⁻
DIAION™ UBA100OH is an anion exchange resin with a uniform particle size, standard cross-linkages, and excellent properties, recommended for pure water manufacturing and processing.
Specification
- Whole Bead Count: 90 min.
- Salt Splitting Capacity: 1.0 meq/mL min.
- Water Content: 59 - 65 %
- Average Diameter: 590 ± 50 μm
- Uniformity Coefficient: 1.10 max.
- Ionic Conversion (OH⁻): 95 % min.
Typical Properties
- Shipping Density: 660 g/mL
- Particle Density: 1.07 g/mL
- Total Swelling (Cl⁻ to OH⁻): 23 %
Recommended Operating Conditions
- Maximum Operating Temperature: 80 °C (Cl⁻); 60 °C (OH⁻)
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Hydraulic Characteristics
Pressure drop for each meter of bed depth at various temperatures and flow rates during normal downflow operation is shown in graphs within the official PDF.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.