Tóm tắt tài liệu kỹ thuật
DIAION SK1BL
PDF datasheet mirror for DIAION SK1BL (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ SK1BL
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Gel
- Functional Group: Sulfonic acid
- Ionic Form: Na⁺
Specification
- Whole Bead Count: 90 min. %
- Salt Splitting Capacity: 2.0 min. meq/mL
- Water Content: 43 - 50 %
- Particle Size Distribution on 1180 μm: 5 max. %
- Particle Size Distribution thr. 425 μm: 1 max. %
- Effective Size: 0.45 min. mm
- Uniformity Coefficient: 1.6 max. -
- Shipping Density: 840 g/L
- Mean Particle Size: 760 μm
- Particle Density: 1.28 g/mL
- Total Swelling (Na⁺ to H⁺): 9 %
Operating limits
- Maximum Operating Temperature: 120 ℃
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 40 m/h
Regenerant
- Regenerant: HCl, H₂SO₄
- Regenerant Concentration: HCl 4 - 10 %, H₂SO₄ 1 - 4 %
- Regenerant Level: 30 - 150 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth is shown in graphs in the original document.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.