Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION SK1BH

PDF datasheet mirror for DIAION SK1BH (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAIONTM SK1BH
  • Type: Strong Acid Cation
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Sulfonic acid
  • Ionic Form: H⁺

Specifications

  • Whole Bead Count: 90 min. %
  • Salt Splitting Capacity: 1.7 min. meq/mL
  • Water Content: 50 - 60 %
  • Particle Size Distribution on 1180 μm: 5 max. %
  • Particle Size Distribution thr. 300 μm: 1 max. %
  • Effective Size: 0.40 min. mm
  • Uniformity Coefficient: 1.6 max. -
  • Ionic Conversion (H⁺): 95 min. eq%

Typical Properties

  • Shipping Density: 790 g/L
  • Mean Particle Size: 700 μm
  • Particle Density: 1.20 g/mL
  • Total Swelling (Na⁺ to H⁺): 9 %
  • Maximum Operating Temperature: 120 ℃
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm

Recommended Operating Conditions

  • Service Flow Rate: 10 - 40 m/h
  • Regenerant: HCl, H₂SO₄
  • Regenerant Concentration: HCl 4 - 10 %, H₂SO₄ 1 - 4 %
  • Regenerant Level: 30 - 150 g/L
  • Regenerant Flow Rate: 2 - 10 m/h
  • Total Rinse Requirement: 2 - 10 BV

Hydraulic Characteristics

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAIONTM SK1BH resin in normal down flow operation is shown in the graphs below. (See the official PDF for exact tabulated values).


Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.