Tóm tắt tài liệu kỹ thuật
IAION SK112L
PDF datasheet mirror for IAION SK112L (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ SK112L
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Gel
- Functional Group: Sulfonic acid
- Ionic Form: Na⁺
Operating limits
- Maximum Operating Temperature: 120 °C
- Operating pH Range: 0 - 14
Feed water
Recommended Operating Conditions
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 40 m/h
- Regenerant: HCl, H₂SO₄
- Regenerant Concentration:
- HCl: 4 - 10 %
- H₂SO₄: 1 - 4 %
- Regenerant Level: 30 - 150 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Product water
- Salt Splitting Capacity: 2.1 meq/mL (min.)
Mechanical / hydraulic
Specification
- Shipping Density: 860 g/L
- Mean Particle Size: 690 μm
- Particle Density: 1.34 g/mL
- Whole Bead Count: 90 % (min.)
- Water Content: 32 - 42 %
- Particle Size Distribution on 1180 μm: 5 % (max.)
- Particle Size Distribution thr. 425 μm: 1 % (max.)
- Effective Size: 0.45 mm (min.)
- Uniformity Coefficient: 1.6 (max.)
Typical Properties
- Total Swelling (Na⁺ to H⁺): 6 %
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ SK112L resin in normal down flow operation is shown in the graphs in the official PDF.
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.