Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION SK112

PDF datasheet mirror for DIAION SK112 (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ SK112
  • Type: Strong Acid Cation
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Sulfonic acid
  • Ionic Form: Na⁺

Operating limits

  • Maximum Operating Temperature: 120 °C
  • Operating pH Range: 0 - 14

Feed water

  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 40 m/h

Regenerant

  • Regenerant: HCl or H₂SO₄
  • Regenerant Concentration:
    • HCl: 4 - 10 %
    • H₂SO₄: 1 - 4 %
  • Regenerant Level: 30 - 150 g/L
  • Regenerant Flow Rate: 2 - 10 m/h
  • Total Rinse Requirement: 2 - 10 BV

Specification

  • Whole Bead Count: 90 min. %
  • Salt Splitting Capacity: 2.1 min. meq/mL
  • Water Content: 32 - 42 %
  • Particle Size Distribution on 1180 μm: 5 max. %
  • Particle Size Distribution through 300 μm: 1 max. %
  • Effective Size: 0.40 min. mm
  • Uniformity Coefficient: 1.6 max.

Typical Properties

  • Shipping Density: 860 g/L
  • Mean Particle Size: 690 μm
  • Particle Density: 1.34 g/mL
  • Total Swelling (Na⁺ to H⁺): 6 %

Hydraulic Characteristics

Graphs for pressure drop at various temperatures and flow rates are available in the original document.

Disclaimer: This extracted summary may omit figures, footnotes, or revisions. Contractual data must be verified against the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.