Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION SAF12A

PDF datasheet mirror for DIAION SAF12A (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ SAF12A
  • Type: Strong Base Anion
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Type I (trimethyl ammonium groups)
  • Ionic Form: Cl⁻

DIAION™ SAF12A is a gel type strongly basic anion exchange resin with standard crosslinkages, low-odor, and low reachable properties.

Operating limits

  • Maximum Operating Temperature: 80 °C (Cl⁻), 60 °C (OH⁻)
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm

Feed water

Not specified.

Product water

  • Amine Effluent: 20 ppb max.

Electrical

Not specified.

Mechanical / hydraulic

  • Service Flow Rate: 10 - 60 m/h
  • Regenerant: NaOH
  • Regenerant Concentration: 2 - 8 % NaOH
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 8 m/h
  • Total Rinse Requirement: 2 - 10 BV
  • Shipping Density: 680 g/L
  • Mean Particle Size: 640 μm
  • Particle Density (Cl⁻): 1.08 g/mL
  • Total Swelling (Cl⁻ to OH⁻): 24 %

Hydraulic Characteristics

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ SAF12A (Cl⁻ form) resin in normal down flow operation is shown in the graphs in the official PDF.

Specification

  • Salt Splitting Capacity: 1.2 meq/mL min.
  • Water Content: 48 - 55 %
  • Particle Size Distribution on 1180 μm: 5 % max.
  • Particle Size Distribution thr. 300 μm: 1 % max.
  • Effective Size: 0.40 mm min.
  • Uniformity Coefficient: 1.6 max.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.