Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION SAF11AL

PDF datasheet mirror for DIAION SAF11AL (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ SAF11AL
  • Type: Strong Base Anion
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Type I (trimethyl ammonium groups)
  • Ionic Form: Cl⁻

DIAION™ SAF11AL is a gel-type strongly basic anion exchange resin with lower crosslinkages and low-odor and low reachable properties. It is recommended for applications in manufacturing drinking water and refining sugar liquors.

Operating limits

  • Maximum Operating Temperature: 80 °C (Cl⁻), 60 °C (OH⁻)
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 60 m/h

Regeneration

  • Regenerant: NaOH
  • Regenerant Concentration: 2 - 8 % NaOH
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 8 m/h
  • Total Rinse Requirement: 2 - 10 BV

Specifications

  • Whole Bead Count: 90 % min.
  • Salt Splitting Capacity: 0.85 meq/mL min.
  • Water Content: 59 - 64 %
  • Particle Size Distribution on 1180 μm: 5 % max.
  • Particle Size Distribution through 425 μm: 5 % max.
  • Effective Size: 0.45 mm min.
  • Uniformity Coefficient: 1.6 max.
  • Amine Effluent: 20 ppb max.

Typical Properties

  • Shipping Density: 690 g/L
  • Mean Particle Size: 620 μm
  • Particle Density (Cl⁻): 1.06 g/mL
  • Total Swelling (Cl⁻ to OH⁻): 1.35 %

Hydraulic Characteristics

Graphs showing approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ SAF11A (Cl⁻ form) resin in normal downflow operation are provided in the official PDF.


Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.