Tóm tắt tài liệu kỹ thuật
DIAION SAF20AP
PDF datasheet mirror for DIAION SAF20AP (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ SA20AP
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Gel
- Functional Group: Type II (dimethylethanol ammonium groups)
- Ionic Form: Cl⁻
DIAION™ SA20AP is a gel type strongly basic anion exchange resin. It is a Type II resin with standard cross-linkages and anti-clumping characteristics. It is recommended for a wide range of applications, especially in the field of manufacturing and processing pure water in a regenerable mixed bed.
Operating limits
- Maximum Operating Temperature: 60 °C (Cl⁻), 40 °C (OH⁻)
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
Feed water
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Product water
See the official PDF for exact tabulated values.
Electrical
Not applicable.
Mechanical / hydraulic
- Service Flow Rate: 10 - 60 m/h
- Shipping Density: 670 g/L
- Mean Particle Size: 630 μm
- Particle Density: 1.11 g/mL
- Total Swelling (Cl⁻ to OH⁻): 24 %
The graphs for approximate pressure drop at various temperatures and flow rates for each meter of bed depth are shown in the original document.
Specification
- Whole Bead Count: 90 % min.
- Salt Splitting Capacity: 1.3 meq/mL min.
- Water Content: 45 - 52 %
- Particle Size Distribution on 1180 μm: 5 % max.
- Particle Size Distribution thr. 300 μm: 1 % max.
- Effective Size: 0.40 mm min.
- Uniformity Coefficient: 1.6 max.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.