Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION SA20ALLP

PDF datasheet mirror for DIAION SA20ALLP (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ SA20ALLP
  • Type: Strong Base Anion
  • Matrix: Styrene-DVB, Gel
  • Functional Group: Type II (dimethylethanol ammonium groups)
  • Ionic Form: Cl⁻

DIAION™ SA20ALLP is a gel type, strongly basic anion exchange resin. It is a Type II resin with standard cross-linkages and anti-clumping characteristics, recommended for pure water manufacturing and processing in regenerable mixed beds.

Operating limits

  • Maximum Operating Temperature: 60 °C (Cl⁻), 40 °C (OH⁻)
  • Operating pH Range: 0 - 14

Feed water

  • Regenerant: NaOH
  • Regenerant Concentration: 2 - 8 % NaOH
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 8 m/h
  • Total Rinse Requirement: 2 - 10 BV

Product water

  • Salt Splitting Capacity: 1.3 meq/mL (min.)

Mechanical / hydraulic

  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 60 m/h
  • Whole Bead Count: 90 % (min.)
  • Water Content: 45 - 52 %
  • Particle Size Distribution on 1180 μm: 5 % (max.)
  • Particle Size Distribution through 425 μm: 1 % (max.)
  • Effective Size: 0.45 mm (min.)
  • Uniformity Coefficient: 1.6 (max.)
  • Shipping Density: 670 g/L
  • Mean Particle Size: 660 μm
  • Particle Density: 1.11 g/mL
  • Total Swelling (Cl⁻ to OH⁻): 24 %

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth is shown in hydraulic characteristic graphs in the official PDF.


Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.