Tóm tắt tài liệu kỹ thuật
DIAION SA20ALL
PDF datasheet mirror for DIAION SA20ALL (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ SA20ALL
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Gel
- Functional Group: Type II (dimethylethanol ammonium groups)
- Ionic Form: Cl⁻
DIAION™ SA20ALL is a gel type strongly basic anion exchange resin, classified as a Type II resin with standard cross-linkages and excellent properties. It is recommended for a wide range of applications, particularly in the manufacturing and processing of pure water.
Operating limits
- Maximum Operating Temperature: 60 °C (Cl⁻), 40 °C (OH⁻)
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
Service flow rate
- Service Flow Rate: 10 - 60 m/h
Regeneration
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Specifications
- Whole Bead Count: 90 min. %
- Salt Splitting Capacity: 1.3 min. meq/mL
- Water Content: 45 - 52 %
- Particle Size Distribution on 1180 μm: 5 max. %
- Particle Size Distribution through 425 μm: 1 max. %
- Effective Size: 0.45 min. mm
- Uniformity Coefficient: 1.6 max.
Typical Properties
- Shipping Density: 700 g/L
- Mean Particle Size: 650 μm
- Particle Density: 1.11 g/mL
- Total Swelling (Cl⁻ to OH⁻): 24 %
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ SA20ALL resin in normal downflow operation is shown in the graphs in the original document.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.