Tóm tắt tài liệu kỹ thuật
DIAION SA12AP
PDF datasheet mirror for DIAION SA12AP (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ SA12AP
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Gel
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: Cl⁻
Description
DIAION™ SA12AP is a gel type strongly basic anion exchange resin with standard cross-linkages and anti-clumping characteristics. It is recommended for a wide range of applications, especially in the manufacturing and processing of pure water in regenerable mixed beds.
Operating limits
- Maximum Operating Temperature: 80 °C (Cl⁻), 60 °C (OH⁻)
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
Feed water
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Product water
- Service Flow Rate: 10 - 60 m/h
Specification
- Whole Bead Count: 90 % min.
- Salt Splitting Capacity: 1.2 meq/mL min.
- Water Content: 48 - 55 %
- Particle Size Distribution on 1180 μm: 5 % max.
- Particle Size Distribution thr. 300 μm: 1 % max.
- Effective Size: 0.40 mm min.
- Uniformity Coefficient: 1.6 max.
Typical Properties
- Shipping Density: 660 g/L
- Mean Particle Size: 660 μm
- Particle Density: 1.08 g/mL
- Total Swelling (Cl⁻ to OH⁻): 24 %
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ SA12AP resin in normal downflow operation is shown in the graphs in the official PDF.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.