Tóm tắt tài liệu kỹ thuật
DIAION SA11A
PDF datasheet mirror for DIAION SA11A (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ SA11A
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Gel
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: Cl⁻
DIAION™ SA11A is a gel-type strongly basic anion exchange resin with lower cross-linkages and excellent properties. It is recommended for a wide range of applications, especially in the manufacturing and processing of pure water.
Operating limits
- Maximum Operating Temperature: 80 °C (Cl⁻), 60 °C (OH⁻)
- Operating pH Range: 0 - 14
Feed water
- Regenerant: NaOH
- Regenerant Concentration: NaOH 2 - 8 %
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Product water
See the official PDF for exact tabulated values.
Electrical
Not specified in the extract.
Mechanical / hydraulic
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
- Shipping Density: 690 g/L
- Mean Particle Size: 600 μm
- Particle Density: 1.06 g/mL
- Total Swelling (Cl⁻ to OH⁻): 1.35 %
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth is shown in graphs within the original document.
Specification
- Whole Bead Count: 90 % min.
- Salt Splitting Capacity: 0.85 meq/mL min.
- Water Content: 55 - 65 %
- Particle Size Distribution on 1180 μm: 5 % max.
- Particle Size Distribution thr. 300 μm: 1 % max.
- Effective Size: 0.40 mm min.
- Uniformity Coefficient: 1.6 max.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.