Tóm tắt tài liệu kỹ thuật
DIAION SA10DL
PDF datasheet mirror for DIAION SA10DL (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ SA10DL
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Gel
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: Cl⁻
DIAION™ SA10DL is a gel type strongly basic anion exchange resin with higher cross-linkages. It is recommended for manufacturing and processing pure water.
Operating limits
- Maximum Operating Temperature:
- 80 °C (Cl⁻ form)
- 60 °C (OH⁻ form)
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
Regeneration
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Feed water
The extracted text does not specify feed water requirements.
Product water
The extracted text does not specify product water quality.
Electrical
The extracted text does not mention electrical specifications.
Mechanical / hydraulic
- Service Flow Rate: 10 - 60 m/h
- Shipping Density: 690 g/L
- Mean Particle Size: 660 μm
- Particle Density: 1.08 g/mL
- Total Swelling (Cl⁻ to OH⁻): 22 %
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ SA10DL resin in normal down flow operation is shown in graphs within the original document.
Specification
- Whole Bead Count: 90 % min.
- Salt Splitting Capacity: 1.3 meq/mL min.
- Water Content: 38 - 43 %
- Particle Size Distribution on 1180 μm: 5 % max.
- Particle Size Distribution through 500 μm: 5 % max.
- Effective Size: 0.50 mm min.
- Uniformity Coefficient: 1.6 max.
Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.