Tóm tắt tài liệu kỹ thuật
DIAION SA10OH
PDF datasheet mirror for DIAION SA10OH (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ SA10AOH
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Gel
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: OH⁻
DIAION™ SA10AOH is a gel type strongly basic anion exchange resin with standard cross-linkages and excellent properties, recommended for manufacturing and processing pure water.
Operating limits
- Maximum Operating Temperature: 80 °C (Cl⁻), 60 °C (OH⁻)
- Operating pH Range: 0 - 14
Feed water
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Product water
- Salt Splitting Capacity: 0.9 meq/mL (min.)
- Ionic Conversion (OH⁻): 90 % (min.)
Mechanical / hydraulic
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
- Shipping Density: 660 g/L
- Mean Particle Size: 720 μm
- Particle Density: 1.07 g/mL
- Total Swelling (Cl⁻ to OH⁻): 23 %
- Whole Bead Count: 90 % (min.)
- Water Content: 55 - 65 %
- Particle Size Distribution on 1180 μm: 5 % (max.)
- Particle Size Distribution through 300 μm: 1 % (max.)
- Effective Size: 0.40 mm (min.)
- Uniformity Coefficient: 1.6 (max.)
Hydraulic Characteristics: Graphs showing approximate pressure drop at various temperatures and flow rates per meter of bed depth are presented in the full datasheet.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.