Tóm tắt tài liệu kỹ thuật
DIAION PK228L
PDF datasheet mirror for DIAION PK228L (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAIONTM PK228L
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Porous
- Functional Group: Sulfonic Acid
- Ionic Form: Na⁺
DIAIONTM PK228L is a porous type strongly acidic cation exchange resin with 14% cross-linkages, recommended for pure water manufacturing and processing.
Operating limits
- Maximum Operating Temperature: 120 ℃
- Operating pH Range: 0 - 14
Regeneration
- Regenerant: HCl, H₂SO₄
- Regenerant Concentration:
- HCl: 4 - 10 %
- H₂SO₄: 1 - 4 %
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Mechanical / hydraulic
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
- Shipping Density: 810 g/L
- Particle Density: 1.32 g/mL
- Mean Particle Size: 730 μm
- Whole Bead Count: 95 min.
- Particle Size Distribution on 1180 μm: 5 max. %
- Particle Size Distribution thr. 425 μm: 1 max. %
- Effective Size: 0.45 min. mm
- Uniformity Coefficient: 1.6 max.
Product water
- Total Swelling (Na⁺ to H⁺): 5 %
- Water Content: 37 - 43 %
- Salt Splitting Capacity: 2.05 min. meq/mL
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAIONTM PK228L resin in normal down flow operation is shown in the graphs in the original document.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.