Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION PK220

PDF datasheet mirror for DIAION PK220 (Mitsubishi). Verify with OEM before design.

Summary

Product Identification

  • Grade Name: DIAION™ PK220
  • Type: Strong Acid Cation
  • Matrix: Styrene-DVB, Porous
  • Functional Group: Sulfonic Acid
  • Ionic Form: Na⁺

Recommended Operating Conditions

  • Maximum Operating Temperature: 120 ℃
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 60 m/h
  • Regenerant: HCl, H₂SO₄
  • Regenerant Concentration:
    • HCl: 4 - 10 %
    • H₂SO₄: 1 - 4 %
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 10 m/h
  • Total Rinse Requirement: 2 - 10 BV

Typical Properties

  • Shipping Density: 800 g/L
  • Mean Particle Size: 720 μm
  • Particle Density: 1.29 g/mL
  • Total Swelling (Na⁺ to H⁺): 8 %
  • Whole Bead Count: 95 min.
  • Salt Splitting Capacity: 1.9 min. meq/mL
  • Water Content: 41 - 47 %
  • Particle Size Distribution on 1180 μm: 5 max. %
  • Particle Size Distribution thr. 300 μm: 1 max. %
  • Effective Size: 0.40 min. mm
  • Uniformity Coefficient: 1.6 max.

Hydraulic Characteristics

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ PK220 resin in normal downflow operation is shown in the graphs in the original document.

Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.