Tóm tắt tài liệu kỹ thuật
DIAION PK216H
PDF datasheet mirror for DIAION PK216H (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ PK216H
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Porous
- Functional Group: Sulfonic Acid
- Ionic Form: H⁺
DIAION™ PK216H is a porous type strongly acidic cation exchange resin with 8% cross-linkages. It is recommended for manufacturing and processing pure water and catalysts.
Operating limits
- Maximum Operating Temperature: 120 °C
- Operating pH Range: 0 - 14
Regeneration
- Regenerant: HCl or H₂SO₄
- Regenerant Concentration:
- HCl: 4 - 10 %
- H₂SO₄: 1 - 4 %
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Mechanical / hydraulic
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
- Shipping Density: 760 g/L
- Mean Particle Size: 740 μm
- Particle Density: 1.19 g/mL
- Whole Bead Count: 95 % min.
- Particle Size Distribution on 1180 μm: 5 % max.
- Particle Size Distribution thr. 300 μm: 1 % max.
- Effective Size: 0.40 mm min.
- Uniformity Coefficient: 1.6 max.
The pressure drop at various temperatures and flow rates per meter of bed depth can be found in graphs within the original document.
Product water
- Salt Splitting Capacity: 1.6 meq/mL min.
- Water Content: 50 - 60 %
- Total Swelling (Na⁺ to H⁺): 8 %
- Ionic Form Conversion (H Form): 95 % min.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.