Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION PK216

PDF datasheet mirror for DIAION PK216 (Mitsubishi). Verify with OEM before design.

Summary

Product Identification

  • Grade Name: DIAION™ PK216
  • Type: Strong Acid Cation
  • Matrix: Styrene-DVB, Porous
  • Functional Group: Sulfonic Acid
  • Ionic Form: Na⁺

Operating Limits

  • Maximum Operating Temperature: 120 °C
  • Operating pH Range: 0 - 14

Recommended Operating Conditions

  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 60 m/h
  • Regenerant: HCl, H₂SO₄
  • Regenerant Concentration:
    • HCl: 4 - 10 %
    • H₂SO₄: 1 - 4 %
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 10 m/h
  • Total Rinse Requirement: 2 - 10 BV

Product Properties

  • Shipping Density: 790 g/L
  • Mean Particle Size: 730 μm
  • Particle Density: 1.26 g/mL
  • Total Swelling (Na⁺ to H⁺): 8 %
  • Whole Bead Count: 95 min. %
  • Salt Splitting Capacity: 1.75 min. meq/mL
  • Water Content: 46 - 52 %
  • Particle Size Distribution on 1180 μm: 5 max. %
  • Particle Size Distribution thr. 300 μm: 1 max. %
  • Effective Size: 0.40 min. mm
  • Uniformity Coefficient: 1.6 max.

Hydraulic Characteristics

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth is shown in graphs within the original document.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.