Tóm tắt tài liệu kỹ thuật
DIAION PK212LH
PDF datasheet mirror for DIAION PK212LH (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ PK212LH
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Porous
- Functional Group: Sulfonic Acid
- Ionic Form: H⁺
DIAION™ PK212LH is a porous type strongly acidic cation exchange resin with 6% cross-linkages. It is recommended for manufacturing and processing pure water and catalysts.
Recommended Operating Conditions
- Maximum Operating Temperature: 120 ℃
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
- Regenerant: HCl, H₂SO₄
- Regenerant Concentration: HCl 4 - 10 %, H₂SO₄ 1 - 4 %
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Typical Properties
- Shipping Density: 750 g/L
- Mean Particle Size: 780 μm
- Particle Density: 1.16 g/mL
- Total Swelling (Na⁺ to H⁺): 10 %
- Whole Bead Count: 95 min. %
- Salt Splitting Capacity: 1.3 min. meq/mL
- Water Content: 55 - 65 %
- Particle Size Distribution on 1180 μm: 5 max. %
- Particle Size Distribution through 425 μm: 1 max. %
- Effective Size: 0.45 min. mm
- Uniformity Coefficient: 1.6 max.
- Ionic Form Conversion H Form: 95 min. eq%
Hydraulic Characteristics
Pressure drop graphs are provided in the original document for various temperatures and flow rates per meter of bed depth in normal downflow operation.
Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.