Tóm tắt tài liệu kỹ thuật
DIAION PK212L
PDF datasheet mirror for DIAION PK212L (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ PK212L
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Porous
- Functional Group: Sulfonic Acid
- Ionic Form: Na⁺
Operating limits
- Maximum Operating Temperature: 120 ℃
- Operating pH Range: 0 - 14
Feed water
- Recommended Regenerant: HCl, H₂SO₄
- Regenerant Concentration:
- HCl: 4 - 10 %
- H₂SO₄: 1 - 4 %
- Regenerant Level: 50 - 200 g/L
Product water
- Salt Splitting Capacity: 1.5 meq/mL min.
Electrical
- (No information found in the extract)
Mechanical / hydraulic
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
- Shipping Density: 790 g/L
- Mean Particle Size: 760 μm
- Particle Density: 1.23 g/mL
- Total Swelling (Na⁺ to H⁺): 10 %
- Whole Bead Count: 95 % min.
- Water Content: 52 - 58 %
- Particle Size Distribution on 1180 μm: 5 % max.
- Particle Size Distribution through 425 μm: 1 % max.
- Effective Size: 0.45 mm min.
- Uniformity Coefficient: 1.6 max.
Hydraulic characteristics regarding pressure drop are described as being shown in graphs, but the graphs themselves are not included in the extract.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.