Tóm tắt tài liệu kỹ thuật
DIAION PAF308L
PDF datasheet mirror for DIAION PAF308L (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ PAF308L
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Porous
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: Cl⁻
Typical Properties
- Shipping Density: 710 g/L
- Mean Particle Size: 680 μm
- Particle Density (Cl⁻): 1.06 g/mL
- Total Swelling (Cl⁻ to OH⁻): 24 %
- Water Content: 62 - 72 %
- Whole Bead Count: 95 min. %
- Particle Size Distribution on 1180 μm: 5 max. %
- Particle Size Distribution thr. 425 μm: 5 max. %
- Effective Size: 0.45 min. mm
- Uniformity Coefficient: 1.6 max.
- Salt Splitting Capacity: 0.9 meq/mL min.
- Amine Effluent: 20 ppb max.
Recommended Operating Conditions
- Maximum Operating Temperature: 80 °C (Cl⁻), 60 °C (OH⁻)
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
Regeneration
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Hydraulic Characteristics
Graphs showing approximate pressure drop are available in the PDF.
Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.