Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION PA412

PDF datasheet mirror for DIAION PA412 (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ PA412
  • Type: Strong Base Anion
  • Matrix: Styrene-DVB, Porous
  • Functional Group: Type II (dimethylethanol ammonium groups)
  • Ionic Form: Cl⁻

DIAION™ PA412 is a porous type strongly basic anion exchange resin. It is a Type II resin with 6% cross-linkages. It is recommended for a wide range of applications, especially in the manufacturing of pure water and wastewater treatment.

Recommended Operating Conditions

  • Maximum Operating Temperature: 60 °C (Cl⁻), 40 °C (OH⁻)
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm
  • Service Flow Rate: 10 - 60 m/h

Regenerant

  • Regenerant: NaOH
  • Regenerant Concentration: NaOH 2 - 8 %
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 8 m/h
  • Total Rinse Requirement: 2 - 10 BV

Product Typical Properties

  • Shipping Density: 690 g/L
  • Mean Particle Size: 630 µm
  • Particle Density: 1.10 g/mL
  • Total Swelling (Cl⁻ to OH⁻): 13 %
  • Whole Bead Count: 95 % min.
  • Salt Splitting Capacity: 1.1 meq/mL min.
  • Water Content: 46 - 52 %
  • Particle Size Distribution on 1180 µm: 5 % max.
  • Particle Size Distribution thr. 300 µm: 1 % max.
  • Effective Size: 0.40 mm min.
  • Uniformity Coefficient: 1.6 max.

Hydraulic Characteristics

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ PA412 resin in normal downflow operation is shown in the graphs provided in the original document.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.