Quay lại Mitsubishi
Mitsubishi logo

Tóm tắt tài liệu kỹ thuật

DIAION PA312LTU

PDF datasheet mirror for DIAION PA312LTU (Mitsubishi). Verify with OEM before design.

Summary

Product identification

  • Grade Name: DIAION™ PA312LTU
  • Type: Strong Base Anion
  • Matrix: Styrene-DVB, Porous
  • Functional Group: Type I (trimethyl ammonium groups)
  • Ionic Form: OH⁻

DIAION™ PA312LTU is a porous type strongly basic anion exchange resin with 6% cross-linkages. It is recommended for higher purity water treatment applications.

Operating limits

  • Maximum Operating Temperature: 80 °C (Cl⁻ form), 60 °C (OH⁻ form)
  • Operating pH Range: 0 - 14
  • Minimum Bed Depth: 800 mm

Feed water and regeneration

  • Service Flow Rate: 10 - 60 m/h
  • Regenerant: NaOH
  • Regenerant Concentration: 2 - 8 % NaOH
  • Regenerant Level: 50 - 200 g/L
  • Regenerant Flow Rate: 2 - 8 m/h
  • Total Rinse Requirement: 2 - 10 BV

Product water

  • Outlet ΔTOC: 10 ppb max.
  • Outlet Resistivity: 15 MΩ·cm min.

Mechanical / hydraulic

  • Shipping Density: 650 g/L
  • Mean Particle Size: 690 μm
  • Particle Density: 1.08 g/mL
  • Total Swelling (Cl⁻ to OH⁻): 23 %
  • Whole Bead Count: 95 % min.
  • Particle Size Distribution on 1180 μm: 5 % max.
  • Particle Size Distribution through 425 μm: 5 % max.
  • Effective Size: 0.42 mm min.
  • Uniformity Coefficient: 1.6 max.

Typical Properties

  • Salt Splitting Capacity: 0.85 meq/mL min.
  • Water Content: 58 - 68 %
  • Ionic Form Conversion (OH⁻ Form): 80 % min.
  • Ionic Form Conversion (CO₃²⁻ Form): 15 % max.
  • Ionic Form Conversion (Cl⁻ Form): 0.2 % max.

The approximate pressure drop at various temperatures and flow rates for each meter of bed depth is shown in graphs within the official PDF.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.