Tóm tắt tài liệu kỹ thuật
DIAION PA312LOH
PDF datasheet mirror for DIAION PA312LOH (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ PA312LOH
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Porous
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: OH⁻
DIAION™ PA312LOH is a porous type strongly basic anion exchange resin with 6% cross-linkages. It is recommended for manufacturing pure water and wastewater treatment.
Operating limits
- Maximum Operating Temperature: 80 °C (Cl⁻), 60 °C (OH⁻)
- Operating pH Range: 0 - 14
Feed water / Regeneration
- Regenerant: NaOH
- Regenerant Concentration: NaOH 2 - 8 %
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Product water
- Salt Splitting Capacity: 0.9 meq/mL (min.)
Electrical
No information available.
Mechanical / hydraulic
- Shipping Density: 680 g/L
- Particle Density: 1.08 g/mL
- Mean Particle Size: 700 µm
- Water Content: 58 - 68 %
- Whole Bead Count: 95 % (min.)
- Particle Size Distribution on 1180 µm: 5 % (max.)
- Particle Size Distribution thr. 425 µm: 5 % (max.)
- Effective Size: 0.45 mm (min.)
- Uniformity Coefficient: 1.6 (max.)
- Total Swelling (Cl⁻ to OH⁻): 23 %
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
Hydraulic characteristics, including pressure drop at various temperatures and flow rates, are shown in graphs in the original document.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.