Tóm tắt tài liệu kỹ thuật
DIAION PA312L
PDF datasheet mirror for DIAION PA312L (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ PA312L
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Porous
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: Cl⁻
Operating limits
- Maximum Operating Temperature:
- 80 °C (Cl⁻)
- 60 °C (OH⁻)
- Operating pH Range: 0 - 14
Recommended Operating Conditions
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Product
- Salt Splitting Capacity: 1.2 meq/mL (min.)
Typical Properties
- Shipping Density: 680 g/L
- Mean Particle Size: 660 μm
- Particle Density: 1.07 g/mL
- Total Swelling (Cl⁻ to OH⁻): 23 %
- Whole Bead Count: 95 % (min.)
- Water Content: 49 - 55 %
- Particle Size Distribution on 1180 μm: 5 % (max.)
- Particle Size Distribution thr. 425 μm: 5 % (max.)
- Effective Size: 0.45 mm (min.)
- Uniformity Coefficient: 1.6 (max.)
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ PA312L resin in normal down flow operation is shown in the graphs below.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.