Tóm tắt tài liệu kỹ thuật
DIAION PA308
PDF datasheet mirror for DIAION PA308 (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ PA308
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Porous
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: Cl⁻
DIAION™ PA308 is a porous type strongly basic anion exchange resin with 4% cross-linkages, suitable for demineralization and decolorization of sugar liquors.
Operating limits
- Maximum Operating Temperature: 80 °C (Cl⁻), 60 °C (OH⁻)
- Operating pH Range: 0 - 14
Regenerant
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Mechanical / hydraulic
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
- Shipping Density: 710 g/L
- Particle Density: 1.06 g/mL
- Total Swelling (Cl⁻ to OH⁻): 24 %
- Effective Size: 0.40 mm min.
- Uniformity Coefficient: 1.6 max.
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth is shown in graphs in the original document.
Typical Properties
- Mean Particle Size: 670 μm
- Whole Bead Count: 95 % min.
- Salt Splitting Capacity: 1.0 meq/mL min.
- Water Content: 57 - 67 %
- Particle Size Distribution on 1180 μm: 5 % max.
- Particle Size Distribution thr. 300 μm: 1 % max.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.