Tóm tắt tài liệu kỹ thuật
DIAION NSA100
PDF datasheet mirror for DIAION NSA100 (Mitsubishi). Verify with OEM before design.
Summary
Product Identification
- Grade Name: DIAION™ NSA100
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Gel
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: Cl⁻
Operating Limits
- Maximum Operating Temperature:
- 80 °C (Cl⁻)
- 60 °C (OH⁻)
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
Feed Water
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
- Total Rinse Requirement: 2 - 10 BV
Product Water
- Not specified in the extract.
Electrical
- Not specified in the extract.
Mechanical / Hydraulic
- Whole Bead Count: 90 % min.
- Salt Splitting Capacity: 1.3 meq/mL min.
- Water Content: 37 - 41.5 %
- Particle Size Distribution on 1180 μm: 5 % max.
- Particle Size Distribution thr. 300 μm: 1 % max.
- Effective Size: 0.40 mm min.
- Uniformity Coefficient: 1.6 max.
- Shipping Density: 690 g/L
- Mean Particle Size: 630 μm
- Particle Density: 1.08 g/mL
- Total Swelling (Cl⁻ to OH⁻): 22 %
Hydraulic Characteristics: The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ NSA100 resin in normal down flow operation is shown in graphs (not provided in extract).
Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.