Quay lại Lanxess LEWATIT
Lanxess logo

Tóm tắt tài liệu kỹ thuật

LEWATIT® UltraPure 1231 MD

PDF datasheet mirror for LEWATIT® UltraPure 1231 MD (Lanxess LEWATIT). Verify with OEM before design.

Summary

Product identification

  • Product Name: LEWATIT® UltraPure 1231 MD
  • Common Description: Weakly basic, macroporous anion exchange resin with uniform particle bead size distribution based on a styrene-divinylbenzene copolymer.
  • Delivery form: Free base/Cl⁻
  • Functional group: Tertiary/quaternary amine
  • Matrix: Styrenic
  • Structure: Macroporous
  • Appearance: Beige, opaque

Specified Data

  • Uniformity coefficient: max. 1.1
  • Mean bead size (d₅₀): 0.59(±0.05) mm
  • Total capacity (delivery form): min. 1.4 eq/L

Typical Physical and Chemical Properties

  • Ultrapure water rinse test (resistivity) after 80 BV: min. 4 MOhm*cm
  • Ultrapure water rinse test delta TOC after 80 BV: max. 50 ppb
  • Bulk density for shipment (±5%): 620 g/L
  • Density: approx. 1.04 g/mL
  • Water retention (delivery form): approx. 61-66 % weight
  • Volume change (free base / Cl⁻ - Cl⁻): max. approx. 24 %
  • Stability pH range: 0-14
  • Storage time (after delivery): max. 2 years
  • Storage temperature range: -20 - +40 °C

Operation

  • Operating temperature: max. 40 °C
  • Operating pH range during exhaustion: 0-8
  • Bed depth for single column: min. 800 mm
  • Backwash bed expansion per m/h (20°C): 21 %
  • Specific pressure loss (15°C): 1 kPa*h/m²
  • Max. pressure loss during operation: 300 kPa
  • Specific flow rate: max. 40 BV/h

Regeneration

  • Regeneration concentration (NaOH): approx. 2-6 wt.%
  • Regeneration quantity (NaOH) co-current: min. 80 g/L resin
  • Regeneration quantity (NaOH) counter-current: min. 50 g/L resin
  • Regeneration contact time: min. 30 minutes
  • Slow rinse at regeneration flow rate: min. 2 BV
  • Fast rinse at service flow rate: min. 2 BV

Additional Information & Regulations

  • Safety precautions: Strong oxidants (e.g., nitric acid) can cause violent reactions. Observe the safety data sheet.
  • Disposal: Follow European waste nomenclature within the European Community.
  • Storage: Recommended to store above freezing point, under roof, dry, away from direct sunlight. If frozen, thaw gradually at ambient temperature. Packaging stability is limited to 24 months.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.