Tóm tắt tài liệu kỹ thuật
LEWATIT® UltraPure 1213 MD
PDF datasheet mirror for LEWATIT® UltraPure 1213 MD (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product Identification
- Product Name: Lewatit® UltraPure 1213 MD
- Product Type: Gel type, strongly acidic cation exchange resin (SAC)
- Matrix: Styrene-divinylbenzene copolymer
- Bead Size Distribution: Monodispersed (uniform particles)
- Functional Group: Sulfonic acid (H⁺ form)
- Appearance: Dark brown
- Delivery Form: H⁺
Operating Limits
- Operating Temperature: max. 60 °C
- Operating pH Range (during exhaustion): 0-14
- Stability pH Range: 0-14
- Max. Pressure Loss during Operation: 200 kPa
- Bed Depth (single column): min. 800 mm
- Storage Temperature Range: -20 - +40 °C
- Storage Time (after delivery): max. 1 year
Feed Water / Operation
- Specific Flow Rate: max. 100 BV/h
- Specific Pressure Loss (at 15°C): 1 kPa*h/m²
Product Water Quality
- Ultrapure water rinse test (resistivity) after 80 BV: min. 12 MOhm*cm
- Ultrapure water rinse test delta TOC after 80 BV: max. 10 ppb
Specified Data
- Uniformity Coefficient: max. 1.1
- Mean Bead Size (d50): 0.60 (+-0.05) mm
- Total Capacity (delivery form): min. 2.1 eq/L
- Ionic Conversion (H⁺): min. 99.9 eq. %
Typical Physical and Chemical Properties
- Bulk Density for Shipment (+/- 5%): 790 g/L
- Density (approx.): 1.23 g/mL
- Water Retention (delivery form, approx. weight %): 45-50 %
- Volume Change (H⁺ - Na⁺, max. approx. %): -8 %
Regeneration
- HCl Regeneration Concentration: approx. 4-6 wt. %
- HCl Regeneration Quantity (co-current): min. 100 g/L resin
- HCl Regeneration Quantity (counter-current): min. 55 g/L resin
- H₂SO₄ Regeneration Concentration: approx. 1.5-8 wt. %
- H₂SO₄ Regeneration Quantity (co-current): min. 120 g/L resin
- H₂SO₄ Regeneration Quantity (counter-current): min. 80 g/L resin
- Regeneration Contact Time: min. 20 minutes
- Slow Rinse (at regeneration flow rate): min. 2 BV
- Fast Rinse (at service flow rate): min. 2 BV
Additional Information
- Safety Precautions: Avoid contact with strong oxidants (e.g., nitric acid). Observe the safety data sheet.
- Disposal: Dispose according to European waste nomenclature within the European Community.
- Storage: Store under roof in dry conditions, above freezing point, away from direct sunlight. If frozen, thaw gradually at ambient temperature. Packaging stability limited to 24 months; check packaging condition thereafter.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.