Tóm tắt tài liệu kỹ thuật
LEWATIT® TP 106
PDF datasheet mirror for LEWATIT® TP 106 (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
Lewatit® TP 106 is a strong base anion exchange resin.
- Common Description: Gel-type, polystyrene-based, heterodisperse particle size distribution.
- Delivery form: Cl⁻
- Functional group: Quaternary ammonium
- Matrix: Styrenic
- Structure: Gel
- Appearance: White, opaque
Applications
Lewatit® TP 106 is particularly applicable for the removal of traces of perchlorate, chlorate, bromate, and other soft anions from various water and process streams, especially those with a high background of chloride and sulfate.
A special start-up procedure is required for potable water treatment.
Specified Data
- Uniformity coefficient: max. 1.7
- Effective size (d10): 0.40-0.55 mm
- Fines (less than 0.315 mm): max. 1 vol %
- Total capacity (delivery form): min. 0.65 eq/L
Note: The values given in this section are preliminary and can be subject to adjustments.
Typical Physical and Chemical Properties
- Bulk density for shipment (+/- 5%): 690 g/L
- Water retention (delivery form): approx. 37-47 wt %
- Stability pH range: 0-14
- Stability temperature range: 1-80 °C
- Storage time (after delivery): max. 2 years
- Storage temperature range: -20 - +40 °C
Note: The values given in this section are preliminary and can be subject to adjustments.
Operation
- Operating temperature: max. 80 °C
- Bed depth for single column: min. 800 mm
- Max. pressure loss during operation: 250 kPa
- Freeboard during backwash: min. 80-100 vol %
Additional Information & Regulations
- Safety precautions: Strong oxidants, such as nitric acid, can cause violent reactions. Observe the Safety Data Sheet.
- Disposal: Dispose of in accordance with the European waste nomenclature.
- Storage: Store under roof in dry conditions, above freezing point and out of direct sunlight. If frozen, thaw gradually at ambient temperature. Recommended use within 24 months of delivery; check packaging condition thereafter.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.