Quay lại Lanxess LEWATIT
Lanxess logo

Tóm tắt tài liệu kỹ thuật

LEWATIT® SP 120

PDF datasheet mirror for LEWATIT® SP 120 (Lanxess LEWATIT). Verify with OEM before design.

Summary

Product identification

LEWATIT® SP 120 is a strongly acidic, very highly crosslinked, macroporous cation exchange resin of standard bead size distribution.

Applications

  • Condensate polishing
  • Softening of water under arduous conditions
  • Treatment of electroplating rinse waters
  • Extraction of heavy metals in hydrometallurgical processes

General Description

  • Ionic form as shipped: Na⁺
  • Functional group: sulfonic acid
  • Matrix: crosslinked polystyrene
  • Structure: macroporous
  • Appearance: beige, opaque

Physical and Chemical Properties

  • Uniformity Coefficient: max. 1.8
  • Bead size: > 94 % from 0.315 - 1.25 mm
  • Effective size: 0.50 mm (+/- 0.08 mm)
  • Bulk density: approx. 800 g/l (+/- 5 %)
  • Density: approx. 1.20 g/ml
  • Water retention: 50 - 55 wt. %
  • Total capacity: min. 1.4 eq/l
  • Volume change (Na⁺ --> H⁺): max. 5 vol. %
  • Stability (pH-range): 0 - 14
  • Stability (temperature range): -20 - 120 °C
  • Storability (product): max. 2 years
  • Storability (temperature range): -20 - 40 °C

Recommended Operating Conditions

  • Operating temperature: max. 120 °C
  • Operating pH-range: 0 - 14
  • Bed depth: min. 800 mm
  • Specific pressure drop (15 °C): approx. 1.5 kPa*h/m²
  • Pressure drop: max. 250 kPa
  • Linear velocity (operation): max. 40 m/h
  • Linear velocity (backwash, 20 °C): approx. 14 - 18 m/h
  • Bed expansion (20 °C, per m/h): approx. 4.5 vol. %
  • Freeboard (backwash, extern/intern): 80 - 100 vol. %

Regeneration (Counter-current)

  • Regenerant: HCl, H₂SO₄
  • Level (HCl): approx. 60 g/l
  • Level (H₂SO₄): approx. 80 g/l
  • Concentration (HCl): 4 - 6 wt. %
  • Concentration (H₂SO₄): 1.5/3** wt. %
  • Linear velocity (regeneration): approx. 5 m/h
  • Linear velocity (rinsing): approx. 5 m/h
  • Rinse water requirement (slow/fast): approx. 5 BV

Regeneration (Co-current)

  • Regenerant: HCl, H₂SO₄
  • Level (HCl): approx. 100 g/l
  • Level (H₂SO₄): approx. 150 g/l
  • Concentration (HCl): approx. 6 - 10 wt. %
  • Concentration (H₂SO₄): approx. 1.5/3** wt. %
  • Linear velocity (regeneration): approx. 5 - 8 m/h
  • Linear velocity (conditioning): approx. 5 - 8 m/h
  • Linear velocity (rinsing): approx. 5 - 8 m/h

Additional Information

  • Safety precautions: Strong oxidants, e.g. nitric acid, can cause violent reactions. Observe the safety data sheet.
  • Storage: Store above freezing point, under roof, dry, and out of direct sunlight. If frozen, allow to thaw gradually before handling or use.

Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.