Tóm tắt tài liệu kỹ thuật
LEWATIT® S 9267
PDF datasheet mirror for LEWATIT® S 9267 (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
Lewatit® S 9167 is a food grade, highly regenerated mixed bed ion exchange resin. It consists of a 1:1.6 mixture of a strong acid cation exchange resin and a strong base anion exchange resin type-I. The resin mixture is ready for use without regeneration.
Applications:
- Demineralisation of potable water and process water in food applications
- Mixed bed units for polishing after primary demineralisation systems
- Demineralisation of service water in small units (e.g., laboratories, household appliances like dishwashers, steam irons, air humidifiers)
Physical and Chemical Properties
- Ionic form as shipped: H⁺/OH⁻
- Functional group: Sulfonic acid/quat. amine
- Matrix: Crosslinked polystyrene
- Structure: Gel type beads
- Appearance: Dark brown / translucent
Properties:
- Uniformity Coefficient: max. 1.1
- Mean bead size: 0.63 (+/- 0.05) mm
- Total capacity (H-Form): min. 2.0 eq/l
- Total capacity (SBA, OH-Form): min. 1.2 eq/l
- Bulk density: 700 g/l (+/- 5 %)
- Density: approx. 1.1 g/ml
- Water retention: 54 - 59 wt. %
- Volume variation (H⁺/OH⁻ ---> Ca²⁺, Mg²⁺/Cl⁻, SO₄²⁻): max. -14 vol. %
- Storability: max. 12 months
- Storability temperature range: -20 / +40 °C
Recommended Operating Conditions
- Operating temperature: max. 60 °C
- Operating pH-range: 0 - 14
- Specific pressure drop (15 °C): approx. 1.0 kPa*h/m²
- Pressure drop: max. 200 kPa
Additional Information
- Safety precautions: Strong oxidants (e.g., nitric acid) can cause violent reactions with ion exchange resins. Observe the safety data sheet.
- Disposal: Dispose of according to European waste nomenclature in the European Community.
- Storage: Store above the freezing point of water, under roof, in dry conditions, and out of direct sunlight. If frozen, thaw gradually at ambient temperature before handling or use.
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.