Tóm tắt tài liệu kỹ thuật
LEWATIT® S 8227
PDF datasheet mirror for LEWATIT® S 8227 (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
Lewatit® S 8227 is a food grade, macroporous, weakly acidic cation exchange resin based on a crosslinked polyacrylate. It is bead-shaped and has a special bead size distribution.
Applications
- Decarbonisation and softening of drinking water (in hydrogen form)
- Brewery water treatment
- Household filter systems
- Technical drinking water plants
Properties
Common Description
- Delivery form: H⁺
- Functional group: Carboxylic acid
- Matrix: Crosslinked polyacrylate
- Structure: Macroporous
- Appearance: white, opak
Specified Data
- Uniformity coefficient: max. 1.8
- Range of size for >90 vol% of all beads: 0.4-1.6 mm
- Effective size (d₁₀): 0.46-0.56 mm
- Total capacity (delivery form): min. 4.3 eq/L
Typical Physical and Chemical Properties
- Bulk density for shipment (+/- 5%): 770 g/L
- Density: approx. 1.2 g/mL
- Water retention (delivery form): approx. 47-53 weight %
- Volume change (H⁺ - Na⁺): max. approx. 70 %
- Stability pH range: 0-14
- Stability temperature range: 1-70 °C
- Storage time (after delivery): max. 1 year
- Storage temperature range: -20 to +40 °C
Operation
- Operating temperature: max. 70 °C
- Operating pH range during exhaustion: 5-14
- Bed depth for single column: min. 800 mm
- Backwash bed expansion (per m/h at 20°C): 5 %
- Specific pressure loss (at 15°C): 1.1 kPa*h/m²
- Max. pressure loss during operation: 250 kPa
- Freeboard during backwash: min. 60-80 vol. %
Regeneration
HCl Regeneration
- Concentration: approx. 3-6 wt. %
- Quantity (co-current): min. 120 g/L resin
- Quantity (counter-current): min. 70 g/L resin
H₂SO₄ Regeneration
- Concentration: approx. 0.5 - 0.8 wt. %
- Quantity (co-current): min. 150 g/L resin
- Quantity (counter-current): min. 90 g/L resin
Rinsing
- Regeneration contact time: min. 20 minutes
- Slow rinse: 2 min. BV (at regeneration flow rate)
- Fast rinse: 2 min. BV (at service flow rate)
Additional Information & Regulations
Safety Precautions
Strong oxidants, e.g. nitric acid, can cause violent reactions if they come into contact with ion exchange resins. The safety data sheet must be observed.
Disposal
In the European Community, ion exchange resins have to be disposed of according to the European waste nomenclature.
Storage
Store under roof in dry conditions above freezing point and without direct sunlight. If frozen, thaw gradually at ambient temperature before handling or use.
Packaging
Packaging stability is limited to 24 months under recommended storage conditions.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.