Quay lại Lanxess LEWATIT
Lanxess logo

Tóm tắt tài liệu kỹ thuật

LEWATIT® S 4428

PDF datasheet mirror for LEWATIT® S 4428 (Lanxess LEWATIT). Verify with OEM before design.

Summary

Product identification

Lewatit® S 4428 is a food-grade, macroporous anion exchange resin of medium basicity. It is based on polystyrene with tertiary and a low level of quaternary amino groups, and is bead-shaped with a special bead size distribution.

It is suitable for:

  • Removal of acid and simultaneous decolorization of solutions of organic products (e.g., glucose, other sugars).
  • Use in Lewatit® WS system (fluidized bed).
  • Use in Lewatit® VWS system (compound fluidized bed).
  • Use in standard co-current regenerated systems.

Physical and Chemical Properties

  • Ionic form as shipped: free base/Cl⁻
  • Functional group: tertiary/quaternary amine
  • Matrix: crosslinked polystyrene
  • Structure: macroporous
  • Appearance: beige, opaque
  • Uniformity Coefficient: max. 1.6
  • Bead size: > 90 % between 0.4 - 1.2 mm
  • Effective size: 0.55 (+/- 0.05) mm
  • Bulk density: 640 g/l (+/- 5 %)
  • Density: approx. 1.02 g/ml
  • Water retention: 52 - 58 wt. %
  • Total capacity: min. 1.6 eq/l
  • Volume change (free base → Cl⁻ / SO₄²⁻): max. 28 vol. %
  • Volume change (total swelling, delivered → Cl⁻): typical 20 vol. %
  • Stability at pH-range: 0 - 14
  • Storability: max. 2 years
  • Storability temperature range: -20 - 40 °C

Recommended Operating Conditions

  • Operating temperature: max. 70 °C
  • Operating pH-range: 0 - 8
  • Bed depth: min. 800 mm
  • Specific pressure drop (15 °C): approx. 1.1 kPa*h/m²
  • Pressure drop: max. 250 kPa
  • Linear velocity operation: max. 5-15 m/h
  • Linear velocity backwash (20 °C): approx. 3-4 m/h
  • Bed expansion (20 °C, per m/h): approx. 25 vol. %
  • Freeboard backwash (extern/intern): 80 - 100 vol. %

Regeneration (NaOH):

  • Counter current regeneration level: approx. 50 - 80 g/l
  • Counter current regeneration concentration: 2 - 4 wt. %
  • Co current regeneration level: approx. 50 - 80 g/l
  • Co current regeneration concentration: approx. 2 - 4 wt. %
  • Linear velocity regeneration: approx. 5 m/h
  • Linear velocity rinsing: approx. 5 - 8 m/h
  • Rinse water requirement (slow/fast): approx. 6 BV

Additional Information & Regulations

  • Safety precautions: Strong oxidants can cause violent reactions. Observe the safety data sheet.
  • Disposal: Dispose according to European waste nomenclature.
  • Storage: Store above freezing point, dry, protected from sunlight. If frozen, thaw gradually at ambient temperature.

Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.