Quay lại Lanxess LEWATIT
Lanxess logo

Tóm tắt tài liệu kỹ thuật

LEWATIT® S 4328

PDF datasheet mirror for LEWATIT® S 4328 (Lanxess LEWATIT). Verify with OEM before design.

Summary

Product identification

  • Product Name: LEWATIT® S 4328
  • Edition: 2017-08-10
  • Type: Macroporous, heterodisperse, medium basic anion exchange resin
  • Base Material: Styrene-divinylbenzene copolymer
  • Form: Bead-shaped
  • Special Features: Special bead size distribution
  • Applications:
    • Lewatit® WS system (fluidized bed)
    • Lewatit® VWS system (compound fluidized bed)
    • Standard co-current regenerated system
    • Removal of acid and simultaneous decolorisation of solutions of organic substances (e.g., sugar, gelatine, glycerin, grape must, whey, fruit concentrates)
    • Potable water treatment
  • Functional Group: Tertiary amine / quaternary ammonium
  • Matrix: Styrenic
  • Structure: Macroporous
  • Appearance: Beige, opaque

Operating Limits

  • Stability pH Range: 0-14
  • Stability Temperature Range: 1-70 °C
  • Operating Temperature: Max. 70 °C
  • Operating pH Range (during exhaustion): 0-8
  • Max. Pressure Loss (during operation): 250 kPa
  • Freeboard (during backwash): Min. 80-100 vol. %

Feed Water / Operating Parameters

  • Bed depth (single column): Min. 800 mm
  • Backwash bed expansion (at 20°C): 17 % per m/h
  • Specific flow rate: Max. 5 BV/h

Regeneration

  • Regeneration Concentration (NaOH): Approx. 2-4 wt. %
  • Regeneration Quantity (NaOH, co-current): Min. 80 g/L resin
  • Regeneration Quantity (NaOH, counter-current): Min. 60 g/L resin
  • Regeneration Contact Time: Min. 30 minutes
  • Slow Rinse: Min. 2 BV (at regeneration flow rate)
  • Fast Rinse: Min. 4 BV (at service flow rate)

Physical and Chemical Properties

  • Delivery Form: Free base / Cl⁻
  • Uniformity Coefficient: Max. 1.6
  • Range of Size (>90 vol% of all beads): 0.4-1.25 mm
  • Effective Size (d₁₀): 0.50-0.60 mm
  • Total Capacity (delivery form): Min. 1.4 eq/L
  • Bulk Density (for shipment, +/- 5%): 605 g/L
  • Density: Approx. 1.0 g/mL
  • Water Retention (delivery form): Approx. 51-58 wt. %
  • Volume Change (free base - Cl⁻): Max. approx. 25 %
  • Volume Change (during exhaustion): Typical approx. 12 %
  • Specific Pressure Loss (at 15°C): 1.1 kPa*h/m²

Storage

  • Storage Time (after delivery): Max. 2 years
  • Storage Temperature Range: -20 to +40 °C
  • Recommended Conditions: Store above freezing point of water, under roof, in dry conditions, without direct sunlight.
  • Frozen Resin: Thaw gradually at ambient temperature; do not mechanically handle until completely thawed.

Safety & Disposal

  • Safety Precautions: Strong oxidants (e.g., nitric acid) can cause violent reactions with ion exchange resins. Observe the safety data sheet.
  • Disposal: According to European waste nomenclature in the European Community.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.